In What Way You Can Soundproof Your Room For Music Recording

In recent time, technology is smart enough to establish a recording studio at home. Most of the amateur producers are setting home studios to pacify their specific purpose. But, most commonly, in major cases, the people take the responsibility of this daunting task focus on the technical side of the scheme. From their perspective, they do care about the most crucial facet of the building to make a home recording studio.

Here we are trying to draw attention about soundproofing room. Sound resistance is a significant part of the planning. And today we are going to discuss the basic particulars.


Why Your Workplace Should Be Soundproof?

Undoubtedly, you need to invest to make a home studio, that can be the standard place for real recording. You have to make ready your PC, supported with a perfect USB audio interface and microphone also. If you have a specific room in your house for using as a studio, then others setup is required to execute the standard record sessions. 

In the beginning, you have to pass through the noise of outside. After being enough sensitive and pinpoint, the polar device on the condenser mic will become an easy victim of noise pollution in the environment. If you are in a live program, there is a chance to absorb noise from the neighbor environment. As a result, you have to do a retake. So, briefly, outside noise is a real culprit. Although the inside noise is equally problematic for this scenario. The point of the source of noise in the studio is not important, but the tendency of sound bounces through different sources is concerning. It is a simple and common reason of sound bouncing. 

A small room is such a space where the pinched sound can cast back and also reflect in countless directions. It naturally affects to your recording. And this should be avoided. The soundproof system is established to prevent to enter the noise outside and shrink the effects of inside noise.


What Is The Limitation Of Soundproof System?

An individual who is unknown to the ethics of music recording is vulnerable to mistake for a soundproof system for acoustic tuning. These two things are the same but according to our reference, the soundproof system is installed to make a pollution-free environment for a home studio.  Acoustic tuning forms this and required acoustic properties of the room. Pacifying all the purposes, acoustic tuning is considered as a form of art which requires a complete setup of noise resistance. There are so many reasons to build an acoustic tuning environment. Especially, while you have planned to use the studio monitoring system. If you are just starting, the installation of the soundproof system is a good initiative which can push you in the right direction. Setting up of a strictly soundproof room is much easy than facing an interruption of the failed soundproof system and low-grade acoustic system.

Where To Begin?

The initiative you should take is to plan a suitable place for the studio. It would be perfect using a garage or some kind of space which is completely remote from the rest part of the house. If this idea is not possible to execute, then try to find out the most isolated room in the house. Your selection of the right place makes easy to create soundproofing ambiance in the house.

Using the most isolated room helps you to eliminate a huge portion of noise from your studio. The basement is a pretty choice for your studio. And one thing you should remember that every bit used vibration is affective as recognizable sound pollution. If you select a busy street along with plenty of traffic, you would surely realize the selection of a room in the basement, which is as far as away from the street as possible.

What To Do If Your Room Is Too large?

According to t the fact, the standard soundproof system needs a high amount of investment to install different accessories. But especially, if you are planning within a low budget. In that scenario, the decision should be to set up a light wall and eliminate the size of the room that way. Surely, it is not a standard solution, is capable enough to deal with large open spaces.


The separate establishment is one of those procedures which lead to being confusing, but uncomplicated. The idea is to construct an additional wall stand, position it over the existing plasterboard and cover it with another frame of sheetrock. This kind of setup is capable to prevent the sound makes a way through the gap of the hard surface of the main structure of your accommodation. Following this trick, you can absorb a good portion of resonation. It is a good idea to use hardy sheetrock for the additional wall frame as it assists to set up a good establishment.

Materials Required For Isolation:

The standard way to make soundproof a room is to make the walls thick. If you are going to start from the surface and thinking to set up a studio from the base, you have extensive options. For example, attaching mass to the existing walls make it thicker. One of the standard ways to get the work completed is to use specific material called Mass Loaded Vinyl, or sheet block. It is a specific high-density layer of material which effectively prevents sound. The thickness of  Sheetblok varies as per cost. So, Sheetblok is not cheap. Considering the size of the studio, you can fix your budget. There is also a good alternative, which is Sponge Neoprene. It has much thickness than average, but it is not sufficient. At the end of the day, it is quite better than nothing. After summing up the exact quantity of needed material, it would be added with trial and error. There is no appropriate amount, we can suggest experiencing how every room is different from each other in shape, facet, and structure. So, in brief, if you want to find stability where the sound is dull to a point where it does not affect your recording.


Gap Sealing:

Once adding enough mass to your walls, it is time to block those little gaps. We are discussing the spaces between panels and uncovered surfaces. There are several products can meet the purpose, one of them is being Acoustical Caulk.


Arrangement Of The Floor:

With the aid of floors, you can keep away the sound resonation, as well as vibrations. Everything that collapses on the floor creates vibrations. The appliances which indirectly collapses on the floor also create vibrations. For example, a cylinder set placed straightly on the floor will give you headaches. The solution is easy enough but needs a lot of work. The concept is to float the floor above the flat surface.  You can use the wood made framework to build beams. You can cover the sheet wood from the top with soundproof materials. If you want to go even additionally, you should fill the gaps between the thick fiberglass and the beams.

Equipment Isolation:

Decreasing the vibrations from the studio equipment is one of the final steps of soundproofing. If you are using a PC inside the room in the place of recording, it is a good practice for making sure that it does not affect your work. Along with the computer, small fans can be also a factor of noise. If you want to feel safe by eliminating the risk of any interruption of equipment interference, you have to always keep your gear outside of the actual recording studio.


Publish Date: 26 Jul, 2019


No Comments To Display

Add New Comment

Recent Posts